Auto Loader

DKM - 330 / 360 series adopt single phase carbon brush motor with superior suction power and easy installation. It is particularly suitable for conveying new materials. SAL - 430 / 460 series use a three phase inductive motor with low noise level and long service life. It also has an automatic motor reverse cleaning device.

Hopper Dryer

DKM series " Econo " hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving. For this series, hot air blows evenly from bottom to the top ( both SHD-800 and SHD-1000 have down-blowing air pipe and accessible door for easy material clearance ) of the hopper with capacity ranging from 12 1000 kg.

Crusher

DKM - 16 / 20 series low - speed granulators are suitable for by - the - press recycling of sprues they feature easy operation, excellent performance, low noise and dust level. They are in " Euro " style design and compact in size. High quality blades ensure long - life span. The high security grade also conforms with CE safety standard.

Mixer

Both mixing pail and vane are made of stainlesssteel, easy to clean and absolutely no pollution.
The chain safety device can protect the safety ofoperator and machine.
The material is thick ,strong and durable.
Well-distributed mixing can be done in a shot time, low energy consumption and high efficiency.
Time setting can be controlled easily and preciselyin the range of 0-15 minutes.

Water Chiller

The water chiller is to provided cooling process to plastic moulds to improve molded products quality & cut down injection cycle time.Hence maximizes plastic molding machines`productivity.
Chiller also provided cooling to cool lubrication oil in mian shaft.and transmission medium in hydraulic system of numerically-controlled machine tools, jig boring machines, grinding machines, processing unit,combined machine tools and all kinds of precision machines. Able to provided accurately temperature & effectively, reduce machine tools' deformation and improve processing accuracy.

Cooling Tower

Remove heat from the water discharged from the condenser so that the water can be discharged to the river or recirculated and reused.

Mold Temperature Controller

Adopts PlD thermostat to provide dual(heating & cooling)control,maintains temperature, Precise temperature control within ±1℃；
Save energy & user friendly, no training required;
Strong cooling system without adjust thermostats, able to cool system rapidly;
Simple and easy to operate.
 

Air Compressor

The compact construction may meet the requirements of stable operation Many sets of compressors may be as- sembled on a steel baseplate with internal piping and line connecting each other, easily to fix. A complete set of sino-pm compressor equipped with efficient motor, Vee-belt drive, beltguard, high pressure switch and (delta-star, on-line) starter.
Good design ensures each device easy to service.

Air Filter

Atmospheric air contains a mass of pollutants including dust, water aerosols, hydrocarbon and other gaseous contaminants by the addition of liquid oil, oil aerosols, oil vapor, (if an oil-lubricated compressor is used) liquid water, water aerosols, water vapor, pipe rust and scale as well as any extra micro-organisms that may be living, growing and multiplying in the compressed air lines. All of these unwanted, contaminants will arrive at the point-of-use of a compressed air system but can be removed by various filters depending on the level of clean compressed air required.

Robot

PET Preform Beam Robots is dedicated to 350-1500CC PET Preform, applicable to PET Preform machine among 200-600 tons to get preform out, and also suitable for 1.16 cav. 1.48cav. preform production. Being installed on a fixed plate, take preform out and move to the outside of safe door. It is equipped with cooling system, so the forced air cooling after coming out preform can reduce the inmould cooling time sharply, so as to increase the production cavity.